FastT600 connected AIX 4.3.3 host !

[hieulmfpt]

Dear all !
We are configuring FastT600 connected to AIX host
We create some logical drives on the FastT600 and we connected to AIX host and reboot the host. Logical drive on FastT seem to appear double on AIX host.
one is fcparray Disk Array Device
one is Other FC SCSI Disk Drive
These disks have the same physical name (for use lspv hdisk2 and lspv hdisk8, we can see the same physical name is hdisk2)
We see no error message but we need to know it is normal or we need to re-configure it before we install the application software on it.
Is there anybody have experience on this issue?
Thank in advanced !
My configuration: AIX 4.3.3, FastT600 (1722-60U), 2HBA (6228) direct attached to 2 RAID controller

 

[hieulmfpt]

Dear all,
We have already resolved the problem of the FastT600
Now one logical disk presents as one hdisk on AIX host
The reason is we don't install correct RDAC driver filesets version requirement.
Thanks,