FAQ in the works: Automated route selection - Rev 3.11 switch 1

[rotters]

Elite 192: It seems that I have instrucitons for automated route selection for a switch with rev 700. I have a switch with rev 3.11. Please help!!!

Here is what I have:
1-14-00 no
1-14-01 1-14-03
1 11 01
2 1N 02
3 10 03
4 2 04
5 3 04
6 4 04
7 5 04
8 6 04
9 7 04
10 8 04
11 910 04
12 911 05
13 91N 04
14 9N 04
15 90 04
16 0 06

1-14-04
Route Advance 1-14-06 (only rev 400 What do i do here)
1 01 9
2 02
3 03
4 04
5 05
6 06

1-10-08
1 08
2 11
3 18
4 10
5 03
6 24

1-10-09
01 sfg 01
02 sfg 01
03 sfg 01
04 sfg 01
05 sfg 01
06 sfg 01

1-13-03
CBC = Y

Please help to make this into an FAQ. What is missing is 1-14-06 is only for rev 400 an up. What do you do instead?

 

[ctvi]

I think that 1-14-00 must be flagged as Allow in older versions or you cannot build the ARS table?

Also 1-10-08, 1-10-09 and 1-13-03 are not related to ARS.

You also need 1-1-46 for 9=601 for ars table one.

http://www.ctvi.com

 

[ctvi]

Hold your horses. I just came accross an Elite 192 and you cannot do ARS on version 3. It requires version 400 and up.

Also, 1-1-46 should be 9=101 on earlier versions and you are missing 4-40 should be class1.

http://www.ctvi.com

 

[rotters]

Any more assitance will be appreciated.

 

[rotters]

Please take a look at the programming above. Why is that when they dial 9+ a local number starting with 9, they cannot get out and the digit addition does not work. I am putting the digit addtion for the 3 digit area code when it is a local number.