FALC card status show busy of 13 unit

[ccompany]

From previous 3 months a FALC card not connecting through any phone. When i saw card status then show BUSY status of 14 unit out of 16 and 2 unit show IDLE. I disable/enable it, reinsert it,disable/enable controller card but still show BUSY status. My system is meridian 1 61C version 4.5. Please suggest me.

 

[Firebird Scrambler]

Have you tried swapping over the FALC with another FALC to see if the problem is the card?

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[ccompany]

I was swaped with other falc card, but still 8 unit show BUSY.

 

[trvlr1]

Do you have a spare slot to test with? Have you tried putting this card in to a known good slot?

 

[fritzthecat]

Hello,

I had a similar issue on a few OPT11 Mini Systems FALC located in the expansion cabinet, need to change the expansion cabinet must be a power issue

 

[ccompany]

I was insert this falc card in well known good slot then problem remains same. I replaced that slot with other falc card then problem was solved. All phones are working.

Thanks