Failed disk in volume group

[nyck]

Hello,

I have an HP rx6600 which seems to have a failed disk in a volume group, can someone let me know the steps for replacing this disk with regard to the LVM commands please?

VG Name /dev/vg_vuu
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 2
Open LV 2
Max PV 16
Cur PV 3
Act PV 3
Max PE per PV 4375
VGDA 6
PE Size (Mbytes) 32
Total PE 13122
Alloc PE 12500
Free PE 622
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0

--- Logical volumes ---
LV Name /dev/vg_vuu/ora7
LV Status available/syncd
LV Size (Mbytes) 200000
Current LE 6250
Allocated PE 6250
Used PV 2

LV Name /dev/vg_vuu/vuu
LV Status available/syncd
LV Size (Mbytes) 200000
Current LE 6250
Allocated PE 6250
Used PV 2


--- Physical volumes ---
PV Name /dev/dsk/c2t3d0
PV Status unavailable
Total PE 4374
Free PE 0
Autoswitch On
Proactive Polling On

PV Name /dev/dsk/c2t4d0
PV Status available
Total PE 4374
Free PE 0
Autoswitch On
Proactive Polling On

PV Name /dev/dsk/c2t5d0
PV Status available
Total PE 4374
Free PE 622
Autoswitch On
Proactive Polling On

 

[MagnetoO]

Hello

In the first you must remove the failed disk
vgreduce vg_vuu /dev/dsk/c2t3d0

But I thinl doest not work because all PE in this PV are used

--- Physical volumes ---
PV Name /dev/dsk/c2t3d0
PV Status unavailable
Total PE 4374
Free PE 0
Autoswitch On
Proactive Polling On

 

[nyck]

Hello,

In the end I commented out the three failed mount points & rebooted the server. Once it came back I was able to remove the three failed logical volumes and volume groups. Removed the two failed disks and then replaced them with working ones, I had to perform some whizzy stuff with sasmgr and once all the new drives were being seen from ioscan I then just re-created the volume groups, logical volumes and file systems and restored the 300GB+ of data back and now all is fine

Cheers

Nick