Fail to start the Nicelog system after MB replacement

[mtf]

Hi,

Nicelog 8.5 in a multilogger environment. One of the loggers failed and I need to change the motherboard. After the replacement the OS (Windows NT4.0) starts but a message appears on the screen: "The NiceLog driver is not initialized. Can't start the system".
I completely reinstall the software, but the error message is still there.
Please help!

 

[sduncanson]

The most likely problem is the IRQ used by the NICE cards is not available. Check the BIOS settings on the motherboard, the main ones to look for are:

IDE : disabled
ACPI : disabled
SCSI Controller : IRQ11 (not sure how critical this is)
All IRQs assigned to PCI/ISA/Pnp apart from IRQ10 which should be set to [Legacy ISA]

Within the advanced chipset feature section check:

Memory hole : disabled
System BIOS cacheable : disabled
Video RAM cacheable : disabled
VGA share memory size : 32M

 

[mtf]

Thank you. Indeed was a bios issue. I've copied the bios settings from another logger and the faulty logger started normally.