Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Andrzejek on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Extreme Paging Volume (KXTD-1232)!

Status
Not open for further replies.

RoundAbout

Technical User
Feb 20, 2002
73
US
Is there a way to lower the paging volume on a KXTD-1232?
Background Music plays at a nice level but pages come through WAY too loud! This is over both an amplified PA system AND over Panasonic XDP phones as well. The volume level on the phones is as LOW as it will go and still it's too loud.

Please Help! Going Deaf!

RoundAbout
 
You will find on your AMP that it will have it own output volume control and probably a master, best to play with these level until you find the best sound quality, some speaker also have independant volume switch. also you may find that from the AMP to the telephine system you will have a interface box which everything wires into check the BT5/PAM10 check this out
 
Don't use the MIC input, use the line-level input. If the amp does not have a line-level input it should be replaced with one that does. Or you can purchase a mic-to-line level PAD.
 
There's a thought. Let me check.
Thanks for your help!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top