I'm running a Win2k server with 2 nic's, one for the modem and one connected to a hub. I have a Win98 PC on the hub running Nortel's Bay network Extranet Client. Before installing the server, the cable modem was connected to the win98 PC and was working fine. Since installing the server, I am unable to connect to the host. The server is a used one and had Internet Connection Sharing enabled. The Nortel techs said the VPN client does not work with ICS. I removed ICS and enabled Routing and Remote access. Still no go. I've ben relying on the built in instructions for Win2K to configure the server. I can ping the host, and have internet access from all PCs on the hub. One section refers to ports but ther are no ports listed under the server in the Router and Remote Access window. Any ideas where to go from here would be greatly appreciated.