Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
extracting data from *.btf files (Btrieve/N ver.5.00a)
- Thread starter pwozniak5
- Start date
BtrieveBill
Vendor
My white paper at on Accessing Btrieve files from ODBC can provide much of the background information so that you know what you are getting into.
Sometimes, such an extract can be easy, and sometimes it can be quite difficult. See the section at the end of the paper for a way to extract the raw data, and see if that helps you. If not, you'll need to know a LOT more about the application.
Bill Bach
Goldstar Software Inc.
Sometimes, such an extract can be easy, and sometimes it can be quite difficult. See the section at the end of the paper for a way to extract the raw data, and see if that helps you. If not, you'll need to know a LOT more about the application.
Bill Bach
Goldstar Software Inc.
- Status