Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Extra Blank Page 1

Status
Not open for further replies.

jfield817

Programmer
Jun 2, 2000
153
0
0
US
What could be the cause of a blank page printing at the
end of a report.....I am using Crystal 7

Thanks
john Field
 
We had this problem when printing via the net, Seagate do have a solution for this @
"in which they suggest that you should put a formula into the group footer of the report, OK this is a fix but it’s not the solution.

We then found an article @ crystal which highlighted a similar problem using crystal 8 via the net, the solution was to update your CRViewer.dll & ActiveXViewer.CAB on the server.

We asked Seagate if this solution would work for our problem with V7, but they said that CRViewer.dll V8.0.0.502 would not work with crystal 7.

We have a server run crystal V8 so decided to implement the fix on this server, then from a client's PC we called a report from our V8 server, the clients PC CRViewer.dll was updated to V8.0.0.502. When they next printed a report from our V7 server, no more blank pages printed and the report displayed OK.

So I think that if you can get a copy of dll then copy it to you clients PC's this will fix your problem. I did try to find you the seagate article again without any joy

Hope this help's

Never 3 putting leads to a good score!!!!!
 
It could be that you have set " New Page After" on a Footer somewhere in the Format Section Expert.

If so ... make it conditional in the formula for the option

Not onlastrecord;

then when the last record is reached it won't produce a new page

Jim
 
This is because the summary section of your report.

If you don't have anything to be printed at the summary section which is just one section below the page footer,
you have to hide it by right click that section and select format section and select hide section

Hope this can help
 
Hi check and see if in your report group exper you have the group selected and click the option button and check keep together and print on next page check also
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top