Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

extn no is not going out on o/g calls

Status
Not open for further replies.

01071981

ISP
Aug 18, 2009
18
IN
I have config E1 pri with more than 500 DDI nos.I/c calls to all extn are working ok.but when any of the extn is dialing out only main no is going out to the caller.its not adding extn no .
 
hii every 1,,

i am facing a typical problem linking Md110 to BP250 through CAS / PRI .

the main problem is whenever we dialout from BP250 that particular channel get blocked.

i have changed the parameters , cards and slots as well on both the MD110 and BP250 but the problem still persists.

please help.

 
mdsamir110,

don't hijack other people's threads. Start a new thread instead.

01071981,

please post printouts of these commands:

RODAP:ROU=X;
ROCAP:ROU=X; (where X is the number of your E1 route)
RONDP:ROU=ALL;
NUTRP;
KSCAP:DIR=Y; (Y = extension you are calling from)

/Daddy



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top