External transfer

[hawks]

I can not transfer a external call to another external number. If I call from a internal exyension and transfer to an external number that works. I've had this problem in the past and there was a prombt that needed changeing but it's been so long that I forogt what it is. Thanks for any help.. Oh the switch is Option 11 running RLS 23.

 

[dawgnu]

got "cff" in opts? under ftr...in cdb?

 

[Tbrandes]

That would be in LD 15 CDB > Chg/FTR/OPT cff

 

[hawks]

Thanks but no change with CFF or CFO

 

[Utreg]

You will need following settings:
LD 15
TYPE NET_DATA
TRNX YES
EXTT YES

Watch out for phreakers though....
regs,
@win

 

[hawks]

I'll give it a try.
Thanks

 

[hawks]

no luck

 

[Tbrandes]

It doesn't matter if I use CFO or CFF.

Try turning TRMB to yes in your rdb. It allows an incoming call to be routed back out on the same route.

 

[rtycka]

try to play with FTOP in LD 15 NET DATA and FTTC in set CLS
exp.FTOP FTLY and set CLS FTTU is works.

 

[hawks]

No go so far but I couldn't find any FTOP prombt in LD 15. Thanks for all the advice though if you can thinkl of anything else please let me know.

 

[LanceMI]

Check in LD 56 and see if you are trunk barring.

 

[rtycka]

TYPE NET_DATA
CUST 00
OPT RTD
AC2
FNP YES
ISDN YES
PINX_DN
MBG 0
BSGC 65535
PFX1
PFX2
HLOC
LSC
RCNT 5
PSTN NO
TNDM 15
PCMC 15
SATD 1
OCLI NO
DITI NO
TRNX NO
EXTT NO
FTOP FRES
APAD 0 0
VNR NO
NIT 8
FOPT 14
CNDN
CNAT
CNIP YES

 

[hawks]

Still no luck here is my NET data. I know I'm missing one little prombt somewhere because this has happened in the past with an Option 61C that we had upgraded. Thanks for all the help.

TYPE NET_DATA
CUST 00
OPT RTA
AC2
FNP YES
ISDN YES
PNI 1
PINX_DN
MBG 0
BSGC 65535
PFX1
PFX2
HLOC xxx
LSC xxx
RCNT 5
PSTN NO
TNDM 15
PCMC 15
SATD 1
OCLI NO
TRNX YES
EXTT YES
VNR NO
NIT 8
FOPT 14

 

[rtycka]

do you have really rls 23?

 

[hawks]

RLS 23
Version 2111
Issue 18+

 

[hawks]

I'm back....I've tried everything stated above with no luck. Any other ideas.
Thanks

 

[Capipo]

Check TGAR config at the route and TARG on the set that make the transfer. They must be different.

If you have a TIE line check LD 15 CCS DATA
TRY CCRS=TLD (Must be different of FR2)

 

[nortic]

MAKE SURE THAT THE NEDC AND THE FEDC IN RDB ARE SET TO ETH NOT TO JNT AS JNT PROHIBITS TRANSFER


NORTIC