external transfer to mobile phone

[downunder1]

Hi, I've built a transfer node to an external number, but when I dial in AA will answer [press one]then CP will anounce 'one moment please' followed by hold music, after about 10seconds I will get a message 'the routing information configured for this call is not valid. I've tried (under the ccr tree/transfer) with line and pool selected. I also put a '0' before the number. Can anyone give me something else to try? thanks in advance

Ben

 

[lretrievers]

You may want to try the Norstar/BCM forum for this. The Call Pilot in this forum is the one that goes to a PBX.

 

[downunder1]

thanks for that