Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

External page

Status
Not open for further replies.
flori1

flori1

Technical User
Dec 21, 2004
96
US
Customer has basic 9.0, wants external paging with valcom 1030 horn, in programming at aux. Equipt I make loud page for analog ext #16,but no page ,what else am I misssing?
 
Sort by date Sort by votes
You can't just connect a horn to a station port and have it work. You will need an amplifier or interface between the IP Office and the horn. I would call Valcom and ask what they recommend.
 
Upvote 0 Downvote
My bad, of course there is a 24 volt power supply for the horn. Sorry i forgot to mention that. Is there any thing else in programming?
 
Upvote 0 Downvote
Just did this yesterday. I used analog extension port 25 connected to "phone in" on a Viking RAD unit. 600ohm terminals to tip/ring of amp. In your case, direct to horn. Program a page button with dial ICM page to ext. 25 and works great.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

kelltele
  • Locked
  • Question
External forwading - Via AA
Replies
2
Views
109
tekguy125
tekguy125
vpmol
  • Locked
  • Question
External Call Forwarding
Replies
2
Views
52
vpmol
vpmol
tap364
  • Locked
  • Question
Intercom page buttons haunted 1
Replies
8
Views
80
mmico
mmico

Part and Inventory Search

Sponsor

Back
Top