External call forward 1

[pdulfo]

Is it easy to set the MD110 to call forward external incoming external calls.

ie an outside caller phones in and gets transferred to a member of staff's mobile phone ?

 

[Navdeep110]

There are lots of diffrent ways:
In case you have specified official mobile nos.
Then initialize them in ADCOI:ABB=****,TRA=**********,CLASS=0&&3;
& anyone can forward there calls on the ABB no. & you can be free of billing hassles.
Procedure to forward is *21*ABB#
To cancel #21#


BR,
NAVDEEP

 

[whosrdaddy]

normal ECF procedure is *22#external nr#
only prerequisite is that D3 of the CDIV parameter of the extension is 1 (check with kscap, change with kscac)

greetings,

http://www.damovo.com

 

[jazaya]

Any one with a solution for this scenario?
Answering position of a route is RODNI to a ADN.
ADN is set to external follow me.
If I dial ADN from inside it will get diverted.
But if i dial from outside (come in on the route,it will not be diverted.
Cheers

Experience it, there is no substitute.
RemoveThisJazayeri@kiasagroup.com

 

[whosrdaddy]

rerouted calls can only go internal with rodni. if you want rerouted calls go into the network, uses rorni.

http://www.damovo.com

 

[jazaya]

OK,let me rephrase the question:
we have a dedicated co line on ADN.The ADN is hotlined to the dest and only this ADN is allowed to use this line.We have used RODNI to set Day and night answering position and works OK.
What do we do if we want the incoming call from co line to this ADN to be diverted as External follow me?when we set it using procedure (*22#dest+external number#)only internal calls to ADN are diverted to external followme position and calls from co line are not diverted.infact the calls get lost and although the caller gets ringback tone it will ring for ever on an unknown position.(with no indication on ADN)ADN is free????
BC9 No CNIs

Experience it, there is no substitute.
RemoveThisJazayeri@kiasagroup.com