external access to dn problem - urgent 1

[tellyteck]

Hi, I configured a 3903 and it works fine internally but is not accessible from the outside world. I have compared the translations to a working 3903 and have changed accordingly;still it does not work.Could MM have anything to do with this.Do the changes take place immediately.The config is below.Any help is greatly appreciated-dont know whats wrong-its for Director of co; murphy's law!Thank you for any help.
DES MODELA
TN 035 0 00 04
TYPE 3903
CDEN 8D
CUST 0
FDN 3999
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 1
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA GRLA CRPD STSD
MWA RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHA FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ
AHA DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CPND_LANG ENG
RCO 0
HUNT 3999
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 MCR 8019 0 MARP
CPND
NAME
XPLN 15
DISPLAY_FMT FIRST,LAST
01 MCR 8019 0
CPND
NAME
XPLN 15
DISPLAY_FMT FIRST,LAST
02
03 SSU 0000
04
05
06
07
08
09
10
11
12
13
14
15
16 MWK 3999
17 TRN
18 AO6
19 CFW 16 3999
20 RGA
21 PRK
22 RNP
23 SCC 0068
24
25
26
27
28
29
30
31
DATE 6 JAN 2005


NACT

 

[johnpoole]

are you sure 8019 is in your did range? if so check ld 49 prt idc return return..

john poole
bellsouth business
columbia,sc

 

[McGruff753]

When you say "is not accessible from the outside world", exactly what is happening? Is it a fast busy, a slow busy, does it go to the operator, or does voicemail pick up? Is 8019 in your DID range? Can you post the working set you compared it to? Thanks.

 

[janchundia]

Check the restricction list into the Meridian Mail.

Javier

 

[johnpoole]

need your imput, let us know how you are trying to reach it, dialing the 7 digit dn or thru a menu service? etc

john poole
bellsouth business
columbia,sc

 

[tellyteck]

Thanks so much for assisting me-I need it!Here is a copy of the working dnb that is identical to the one not working. The idc capture is below copy of working. Janchundia,how do I check the restriction list into MM?
CUST 00

ACT

REQ: prt

TYPE: 3903

TN 29 15

DATE

PAGE

DES


DES MODELA
TN 029 0 00 15
TYPE 3903
CDEN 8D
CUST 0
FDN 3999
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 1
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA GRLA CRPD STSD
MWA RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHA FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ
AHA DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CPND_LANG ENG
RCO 0
HUNT 3999
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 MCR 8640 0 MARP
CPND
NAME
XPLN 15
DISPLAY_FMT FIRST,LAST
01 MCR 8640 0
CPND
NAME
XPLN 15
DISPLAY_FMT FIRST,LAST
02
03 SSU 0000
04
05
06
07
08
09
10
11
12
13
14
15
16 MWK 3999
17 TRN
18 AO6
19 CFW 16 3999
20 RGA
21 PRK
22 RNP
23 SCC 0068
24
25
26
27
28
29
30
31
DATE 6 JUL 2004


NACT
IDC
prt

TYPE idc

CUST 0

DCNO


DCNO 2
IDGT CDGT
3053 3300
3054 3300
3056 3300
3057 3300
3058 3300
3059 3300
3061 3300
3062 3300
3063 3300
4100 3300
4101 3300
4102 3300
4103 3300
4104 3300
4105 3300
4106 3300
4107 3300
4108 3300
4109 3300
4110 3300
4111 3300
4112 3300
4113 3300
4114 3300
4115 3300
4116 3300
4117 3300
4118 3300
4119 3300
4120 3300
4121 3300
4122 3300
4123 3300
4124 3300
4125 3300
4126 3300
4127 3300
4129 3300
4130 3300
4131 3300
4132 3300
4133 3300
4134 3300
4135 3300
4136 3300
4137 3300
4138 3300
4139 3300
4140 3300
4142 3300
4149 3300
4150 3300
4151 3300
4153 3300
4161 3300
4162 3300
4163 3300
4164 3300
4165 3300
4166 3300
4167 3300
4168 3300
4169 3300
4171 3300
4173 3300
4174 3300
4177 3300
4181 3300
4182 3300
4183 3300
4186 3300
4187 3300
I found 8019 by doing the following:
ludn
CUST 0
DN 80

CUSTOMER 00 - UNUSED DNS:
8012 8013 8014 8015 8016 8017 8018 8019 802 803 804
8051 8052 8053 8054 8055 8056 8057 8058 8059 806
807 808 809
Any help greatly appreciated-no idea whats wrong.

 

[McGruff753]

So, is 8010 a working DID number? Or is it an internal extension only? The set you checked it against is an 86 number so I have to wonder how big your DID range is.

 

[McGruff753]

And if 8010 or 8011 are not DID numbers, then you need to change the DN 8019 to something in your DID range. Do a

ludn
CUST 0
DN 86

 

[johnpoole]

do you have any vacant numbers in the 8600 range? your did range may only be 100 numbers, are their other 8600 numbers that you can "reach" from outside... are you dialing the did? or trying to go thru a mail menu, if so what type of mail

john poole
bellsouth business
columbia,sc

 

[tellyteck]

hi all; oh, you are so right. there are no *&% numbers for did that are 80;darn. i guess the fastest way to resolve this is to use one of the ones below that are listed as dids!
CUSTOMER 00 - UNUSED DNS:
860 861 8620 8641 8642 8646 8647 8648 8649 865
866 867 868 869
So far, as I am new to the meridian I have been configuring by hand.Is it adviseable to just do a cpy from the one 86XX to a new one? thanks so much.oh dear must tell director!

 

[johnpoole]

yes i don't have any trouble with the copy command and we use all day long, just don't copy an acd set..

john poole
bellsouth business
columbia,sc

 

[tellyteck]

great thank you soooo much.