Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Extension / PLID Listing 1

Status
Not open for further replies.

ianfogarty

Technical User
Jan 20, 2015
5
GB
Hi
I am quite new to Mitel so if I am asking something daft, please excuse me. I am wanting a listing (either through the Web Interface or as a management command where I can see what extension number is assigned to what PLID. We have a peripheral cabinet with analogue cards and I am wanting to double check our documentation and if possible delete some unused numbers.

What I am after is along the lines of...

Ext | Cabinet | Shelf | Slot | Circuit

.. for all the extensions on the switch.

Is this possible?

Many thanks

Ian
MXe3300, 6.0 SP3
 
The Analog Sets form shows that for me...
Web Interface Users and Devices -> Advanced Configuration -> Analog Telephones -> Analog Sets
 
Brilliant. Thank you cinter - that is exactly what I wanted.

Ian
 
You can also get the information from the MAINTENACE COMMAND interface. LOC FEATURE EXTENSION will return the PLID as well as the current STATE of the extension

NO GOOD DEED GOES UNPUNISHED!
 
I would just export the User and Device Configuration form, should include PLIDs for any TDM sets and MAC addresses for IP sets for everything connected to that MCD.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top