Hello all, I am new to EMetroTel / Asterisk. A Hotel customer asked for frontdesk extension to be programmed as zero (0) for room analog phones to push to get to, in addition to a speed dial for it. I know here in US / Canada we can have a leading zero, and I have noted many times in hotels that pressing 0 takes you to frontdesk. But then being a 3 digit extension plan, phone will keep waiting for other two digits until some timeout. So technically should this extension be setup as a 000?
Actual phone could have a number like 123 and for that matter a second frontdesk phone could be 124 and then if someone in a room pushes 0, then it should ring both phone like in a huntgroup with a pilot number to be 0.
Can someone advise on what is the best way to achieve a 0 extension number please and to create a huntgroup for it?
Thank you so much.
Actual phone could have a number like 123 and for that matter a second frontdesk phone could be 124 and then if someone in a room pushes 0, then it should ring both phone like in a huntgroup with a pilot number to be 0.
Can someone advise on what is the best way to achieve a 0 extension number please and to create a huntgroup for it?
Thank you so much.