I have a fairly good idea of the suffixes for HP printer models. Does anyone have a complete listing for all of the model suffixes HP has used over the years? The usual ones include: d, n, t. Some older/obscure ones: Cse, Cxi (or just x, i). Thanks!
D is Duplex which mean it has the duplexer installed when manufactured. This could be added on older machines. The new one is a problem as it requires a different approach.
T Mean it had additional tray supplied when sold, Again this can be added later
N mean it was supplied with a network card.
With the newer one that use X can not find the price list that explained all options. But the ones I purchased did have network card, second tray and had Duplex working (so it a DTN). The problem is upgrading these if you want duplex as the unit is built in already but not operational N or TN. The A is USB Only but has duplex.
Printer Models:
No extension ? Base model.
DN ? Duplexer + Networkcard + extra memory.
DNM ? DN + harddisk (Mopier).
DTN ? DN + extra Tray.
DTNLS ? Same as DTN but at reduced speed. Low budget model.
GN ? Harddisk + Networkcard (Special edition of CLJ 9500)
HCI ? High Capacity Input (1500 Sheets or bigger)
HDN ? Harddisk + DN and usually extra tray & extra memory.
HNS ? High capacity (typically 2000 or more sheets) + networkcard + stacker.
L ? Low budget model. Limited expansion posibilities. Low speed, low memory & usually only one tray (manual). Typically host-based also.
LN ? Same as the L-model + Networkcard.
M ? Mac compatible model !
MFP ? Multi function printer (Digital copier/sender).
N ? Networkcard (Might be embedded!).
NW ? Networkcard + Wireless and/or Bluetooth.
TN ? Extra Tray + Networkcard.
Si ? Base model (LJ 5Si only).
SiMX ? Harddisk + extra memory + networkcard.
SiNX ? Networkcard + extra memory.
PH+ ? Extra trays Paper Handling Plus (6 in total on the CLJ 4700 PH+)
X ? Duplexer + Networkcard + extra tray.
NF ? Networkcard + fax.
FXI ? Networkcard + fax + card reader.
There are probably more extensions out there but those are the ones I know...
SI was for series 3 and 4 Laser. It was the Canon epn engine. The series III (3) was the first printer to use PCL5. It was 600dpi when other were only 300dpi. The 4 had the SI, M and the unmaked 4. Like the II (2) the 3 also had a D model.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.