Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Expansion Server Not Working

Status
Not open for further replies.

BrianCosta

Systems Engineer
Oct 25, 2018
376
JO
Hello ...

I have IPOSE 11.1.1.1.0 build 18
have Secondary, and 4 Expansion 500v2 Expansion and All is working,
yesterday, I tried to add a new Expansion Server 500v2, using the same setting.
Unfortunately, the new expansion did not get the server edition license from expansion, the line between new expansion and the server is out of service.
the two sites are reachable and the new expansion is light orange on the solution.
when I checked the system status between the lines already working and this not working, I found the following differences,

20240514_142902_xpf6u3.jpg


20240514_142914_ytzdmg.jpg


The difference is is Non-working line:

Local Server IP Office behind NAT: True

In working Line:

Local Server IP Office behind NAT: False

Thanks
 
Did you intend for that expansion unit to be behind NAT? If not, your network is messed up.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top