expansion meridian

[webby123yk]

expansion meridian

how do i change the system id on a expasion meridian ssc

 

[johnpoole]

not sure but try ? in ld 117.. i don't get to play with 11;s very much

john poole
bellsouth business
columbia,sc

 

[webby123yk]

the system id is specified the dongle i have found out. but i need to change the system id in the expansion to match a new dongle that is now my promblem any suggestions

 

[MagnaRGP]

What do you mean by an "expansion Meridian"? A survivable remote IP cabinet?

 

[acewarlock]

What Model?

OPT 11????
OPT 61????
OPT 81????

 

[March71]

if i'm not mistaken, only an opt 11c has a "dongle" ??

is this what you need?

Set system ID
Each Meridian 1 system has a unique system ID number (SID) selected from 0000 to 9999. The 4-digit ID number can be printed or set by the following commands.
To print the current SID: TSID sid
To change the SID: SSID sid -- SID

or is it the info that appears when you do:

>ld 22
tid

-> if this is the case, you might need keycodes to change it. be careful though if you have mermail, as it needs to match the system id.

good luck!