Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
EXPANSION CICS
- Thread starter tdip257
- Start date
RikRodgers
Vendor
The CICS only expands up to 24 possible station ports.
If you're talking about a MICS, you'll need at least a 2 port fiber expansion card, and a 0x16 fiber station module.
If you're talking about a MICS, you'll need at least a 2 port fiber expansion card, and a 0x16 fiber station module.
curlycord
Programmer
Yes he has a MICS if 32 ports used.
Google the info Rik gave you for the part numbers but make sure they are fiber not copper.
Powe down system, add expansion card and add 0X16 to the bottom port of the 2 then power up.
Your new ports will start at ports 301-316.
Google the info Rik gave you for the part numbers but make sure they are fiber not copper.
Powe down system, add expansion card and add 0X16 to the bottom port of the 2 then power up.
Your new ports will start at ports 301-316.
- Status
Similar threads
