Expanding MICS System

[telllman]

I need to go to a client site this week and add a FSM. The system already has a 2 port expander in it. So I need to add a 6 port expander and take out the 2 port. I will put the 2 fiber cables on the six port on the top 2 ports 8 and 7 to keep the same config. Then plug the new FSM into port 3 on 6 port expander. Please confirm this is correct...

Many Thanks
Steve

 

[curlycord]

What is an FSM?

I would normally put stations on the bottom and trunks on the top.



________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[hawks]

I assume its Fiber Station Mod and curly is correct start the station mods at the bottom. One thing don’t panic if the system does not come back up on 5 minutes or so give it time. If it starts to boot with the 6 port then let it complete with the 6 port fiber. If you don’t and you unplug and put the 2 port back in and fire it up. Then the system will more than likely default on you and you’ll lose all of the programming.