Good Morning All:
I am still trying to figure out this system that we inherited, so please bear with me on this question.
We have an NEC 2000 IVS2 system consisting of just 1 PIM.
the slots in the PIM are configured as such:
Slot 0: 8 DLCP (8-port Digital Station Interface Card)
Slot 1: 8 DLCP (8-port Digital Station Interface Card)
Slot 2: 8 DLCP (8-port Digital Station Interface Card)
Slot 3: 8 DLCP (8-port Digital Station Interface Card)
Slot 4: 8 COTS (8-Port Analog Trunk Interface Card)
Slot 5: 8 COTS (8-Port Analog Trunk Interface Card)
Slot 6: 4 LCDA (4-Port Analog Station Interface Card)
Slot 7: 8 DLCP (8-port Digital Station Interface Card)
Slots 8-11 : Blank
Slot: 12 CP14 (Central Processor)
We currently have 35 Dterm Series E (16D and 8D) in the Office. We also have an NEAXMail AD-40 Voice mail system.
Now the QUESTION: Can I add more Telephone terminals to the system Without adding another PIM ? Can I remove the 4-LCDA card to replace with an 8-DLCP to get 8 more terminals ? What functionality will I lose ? Or can I replace the (2) 8-COTS cards with (2) 8-DLCP?
In the manual it seems to indicate that i can get up to 64 terminals in 1 PIM !!
Any input would be GREATLY appreciated. I am getting conflicting info. from the dealers.
Thank you very much
I am still trying to figure out this system that we inherited, so please bear with me on this question.
We have an NEC 2000 IVS2 system consisting of just 1 PIM.
the slots in the PIM are configured as such:
Slot 0: 8 DLCP (8-port Digital Station Interface Card)
Slot 1: 8 DLCP (8-port Digital Station Interface Card)
Slot 2: 8 DLCP (8-port Digital Station Interface Card)
Slot 3: 8 DLCP (8-port Digital Station Interface Card)
Slot 4: 8 COTS (8-Port Analog Trunk Interface Card)
Slot 5: 8 COTS (8-Port Analog Trunk Interface Card)
Slot 6: 4 LCDA (4-Port Analog Station Interface Card)
Slot 7: 8 DLCP (8-port Digital Station Interface Card)
Slots 8-11 : Blank
Slot: 12 CP14 (Central Processor)
We currently have 35 Dterm Series E (16D and 8D) in the Office. We also have an NEAXMail AD-40 Voice mail system.
Now the QUESTION: Can I add more Telephone terminals to the system Without adding another PIM ? Can I remove the 4-LCDA card to replace with an 8-DLCP to get 8 more terminals ? What functionality will I lose ? Or can I replace the (2) 8-COTS cards with (2) 8-DLCP?
In the manual it seems to indicate that i can get up to 64 terminals in 1 PIM !!
Any input would be GREATLY appreciated. I am getting conflicting info. from the dealers.
Thank you very much