Exiting/Entering setup screen on IBM 3151 console on RS6000 C10

[Siemens]

I have an IBM RS6000 C10 with an IBM 3151 console screen attached and somehow have entered the Setup Screen Menu. I'd like to know how to exit this and also how to get back into it and what settings to use. Thank You

 

[PSD]

Siemens,

To get out press escape and do not save changes.

I think off the top of my head to get into the menu it is:

hold cntrl and the press -

The default settings are correct for the terminal, unless you have a specific problem.

Let me know if the above commands do not work.

Cheers



PSD
IBM Certified Specialist - AIX V4.3 Systems Support
IBM Certified Specialist - AIX V4 HACMP

 

[Siemens]

Unfortunately, it didn't work. Esc causes beeping. The screen has the options
General Communications Keyboard/Printer Functions
I don't know how to contact PSD

Kind Regards
Siemens

 

[PSD]

Here is some info. on IBM 3151 terminals:

http://www.austin.ibm.com/doc_link/.../asycomgd/Term3151_AsynComm.htm#C434E0F332jax

Try:

IBM: 3151: Ctrl-ScrollLock to get in/out of the menu.

Cheers

PSD
IBM Certified Specialist - AIX V4.3 Systems Support
IBM Certified Specialist - AIX V4 HACMP

 

[Thief]

If it also does not work maybe F3 key does the thing....
or if u have a PF3 try pressing that ..

 

[Siemens]

Thank you PSD.
Eventually I realized that ctrl - (from numeric keypad) was the one to try.
Regards