Does anyone have any information about Executone Eclipse, I am replacing this system with an Avaya and would like to get their set data off of it. I can get logged in and to the main menu however after that I can't seem to get any usable/readable data. Unable to find any manuals on line either
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Executone information
- Thread starter 1Gordo
- Start date
Couple of notes:
-- You need communications software that emulates a TVI925 or TVI950 terminal in order that screens paint properly. Without this emulation, you'll only see junk.
-- The F screen is the most valuable resource for a cutover - shows what extensions are assigned to which physical ports. If you're using Avaya digital stations, it makes the cut much easier. Take a screen shot of it.
-- The H screen allows list and set commands for various system details. See manual for specifics - but an example is: List phone type M64 - will show all extensions with Model 64 phones. List day ring 001 shows the extensions that ring on line 1, etc.
-- Digital phones are all four-wire, most station cards are 12 port. If it has a pre-made frame, the stations go down the left side, four wires then skip a pair, and continue down center set of stitches. Next card begins on lower half of middle pins and continues down right side.
Good luck
-- You need communications software that emulates a TVI925 or TVI950 terminal in order that screens paint properly. Without this emulation, you'll only see junk.
-- The F screen is the most valuable resource for a cutover - shows what extensions are assigned to which physical ports. If you're using Avaya digital stations, it makes the cut much easier. Take a screen shot of it.
-- The H screen allows list and set commands for various system details. See manual for specifics - but an example is: List phone type M64 - will show all extensions with Model 64 phones. List day ring 001 shows the extensions that ring on line 1, etc.
-- Digital phones are all four-wire, most station cards are 12 port. If it has a pre-made frame, the stations go down the left side, four wires then skip a pair, and continue down center set of stitches. Next card begins on lower half of middle pins and continues down right side.
Good luck
- Status
Similar threads
- Locked
- Question
- Locked
- Question