Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Exec distinctive ring

Status
Not open for further replies.

letalis

IS-IT--Management
Dec 18, 2013
11
0
0
DE
Hi,

Is there a way to search all DN's that have executive distinctive ring allowedin CLS?

Thanks.
 
Never heard of executive distinctive ringing. Distinctive ringing yes, but not the other.
 
FYI

Distinctive Ringing by DN (DRDN) allows a distinctive ringing cadence to
be configured for each DN key. The ability to have sets with a distinctive ring
is useful for distinguishing calls with different DNs and is only available on
Meridian Modular sets.
Distinctive ringing is an enhancement to the existing Executive Distinctive
Ringing (EDRG) feature. This existing feature supports a distinctive ringing
cadence when a call is made from an executive set. The Distinctive Ringing
by DN feature enhances the EDRG feature by introducing two new
functionalities.
The EDRG feature is determined by Class of Service as executive and it will
ring distinctively. The existing functionality of EDRG is modified to allow
the ringing cadence to be defined on a DN key basis rather than a TN basis.
 
This may be what your looking for in LD 81 do this



REQ lst
CUST 0
DATE
PAGE
DES
FEAT drda
FEAT


CUST 0 DATA NOT UPDATED SINCE NO DATE


NACT

 
If you have any phones with DRDA it will listed here
 
Try LD 81 and at the FEAT prombt put in DRDA
 
Thanks alot. I really appreciate it!
 
Actually Exec D R would be the same as above except at FEAT put in EXR0, EXR1, EXR2, EXR3, or EXR4, that is the ring cadence for it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top