Exchanged 2602-2302! No Resources!

[Avayell]

Version 9 with 3 2602 medpros in network region 1.
Another 2302 for SIP. Tried to exchange one 2602 with the 2302. I exchanged IPs also. After that no external calls. No resources. Could it be that no remove board was forced. Just disabled the interface through the ch ip-interface and exchanged physical positions of the boards?


The problem is that i cannot play. It is bank. I have to find out why and then try it again.

 

[big70]

Did you replace the connector ad the back of the G650???????
They are not the same......

Greets Peter

 

[Mitch672]

you have to COMPLETELY remove each cards programming, then PHYSICALLY remove each card.

Now start over, install the cards, and add the IP-interfaces back in.

You cannot just "swap" cards positions without removing the programming and then removing the cards. After you rremove the programming and the cards, do a 'display cabinet x" to make sure the cards are not seen by the switch.



Mitch

AVAYA Certified Expert