EVENT 1000 error Faulting application svchost.exe

[terminala]

hi
its a new server ibm x3650, windows 2003 server SP2
used for shared folder only.
suddenly spot work shared filder ... clients have ping but cant acces folder. Work only after restart.
and have this event
"Faulting application svchost.exe, version 5.2.3790.3959, faulting module unknown, version 0.0.0.0, fault address 0x02b6f4b6.

For more information, see Help and Support Center at

http://go.microsoft.com/fwlink/events.asp."

"Faulting application svchost.exe, version 5.2.3790.3959, faulting module unknown, version 0.0.0.0, fault address 0x0114f4b6.

For more information, see Help and Support Center at

http://go.microsoft.com/fwlink/events.asp."

I found some information about stoping the services - "server" but i want to fix this. Can anyone help me with some info ? thanks

 

[terminala]

i found this info:
"Right - the network services svchost (netsvcs) has crashed, which will take down all services running inside it. Most should restart, but at least one (the server service) will not until the system is rebooted - because srv.sys is the driver the server service loads into the system, and when a crash in the service occurs the srv.sys driver does not get unloaded. It is still running, but no longer talking to the server service - and for security reasons, only one copy can be running at any time, meaning it can no longer be unloaded and reloaded, thus the reboot requirement.

What I would suggest is a userdump dump of the svchost.exe process crashing:

1. Download the userdump executable, located here:

http://www.microsoft.com/downloads/details...;displaylang=en

2. Double-click the downloaded .exe file to extract the userdump installation files. By default, these will extract to C:\kktools\userdump8.1. Please click "Yes", then "Unzip" to extract the files.

3. Double-click the "setup.exe" file located in C:\kktools\userdump8.1\x86 to install the userdump utility. Please select the defaults when possible, and make certain to select the "Enable dump on process termination" feature when prompted.

NOTE: You may need to reboot the machine at this point for the installation to complete successfully.

4. Create a folder called C:\userdump.

5. Once installed, you will find a new icon in your control panel called "Process Dump". Please open this utility.

6. When the userdump window opens, please click the "New" button.

7. Please enter "svchost.exe" in the "Application name:" dialog box, and click "OK".

8. Click on the new listing for "svchost.exe", and click the "Rules" button.

9. Select the "Use custom rules" radio button.

10. Type "C:\userdump" in the "Dump file folder" dialog box.

11. Click the "Monitor Process Exit" box

12. Change the "MiniDump Type" to "Complete".

13. Click the "OK" button.

14. Click the "Apply" button, then click "OK".

The next time svchost.exe crashes, it should create a .dmp file (or series of .dmp files) in C:\userdump."
any other suggestion ?

 

[terminala]

Hi i think the problem is resolve after istaling critical update kb890830 and after restart instal all updates from microsoft site.