Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

EVA 3000 question......

Status
Not open for further replies.
TekAndy

TekAndy

Technical User
Mar 6, 2007
185
US
How can I pull a system config file from an EVA3000?

Andy
 
Sort by date Sort by votes
Log in to commandview then add /fieldservice to the line.
Once in fieldservice you should be able to save MLD.
The config of the system is stored on the quorum disks which from memory will be a minimum of 5 drives of the default disk group.
 
Upvote 0 Downvote
tilba16 is correct. It just does not give you anything you can use. This file is used by hp specialist in special cases but is not really useable.

Use SSSU "capture configuration" command.
SSSU is a free provided tool that allows to manage and script commands to an eva's is a very basic way
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

thomasnicholson
  • Locked
  • Question
My first Question
Replies
0
Views
215
thomasnicholson
thomasnicholson
dudecrush
  • Locked
  • Question
Seagate Hard Drive Replacement Question
Replies
2
Views
226
DrB0b
DrB0b
maybeimaleo
  • Locked
  • Question
3PAR Question Regarding Moving LUNs Between CPGs
Replies
0
Views
55
maybeimaleo
maybeimaleo
polani
  • Locked
  • Question
Migration challenge from EVA to V7000?
Replies
4
Views
65
chgwhat
chgwhat
garyinspringhill
  • Locked
  • Question
X460 6i sata raid 5 question
Replies
12
Views
117
goombawaho
goombawaho

Part and Inventory Search

Sponsor

Back
Top