Ethernet Enable MIRAN III

[tekunishan]

Hello,
I am currently working on trying to ethernet-enable a MIRAN III card on an Option 61C. I have set the IP Parameters using the Management Console, and rebooted the card. I have connected a working patch cord from the Audio Adapter to the C-LAN switch. One thing I did notice is that the link light on the switch will not light. I have tried to cross-over to the MIRAN with my laptop, but can never get a link there either. Is this a faulty Audio Adapter, or is the actual card at fault? I have also moved the card to other slots, but to no avail. Thanks in advance!

 

[dlesap]

If the IPE chassis is the old NT8D37, then the MIRAN card have to be set in slot 0, 4, 8 or 12.
If new NT8D37, then all slots are avaliables.
When configuring Ethernet parameters, did you set to "static" the value for ethernet method instead of "bootp"?

 

[tekunishan]

dlesap,
Thanks for the reply, I will be on-site tomorrow, and will check the chassis. The MIRAN card is in slot 8 already, so I guess that won't matter. I did set the IP type to static as well.