Establishing Communication Between BCM450 and CS 1000

[mnmbawazir]

Hi All,

We have the following case:

We need to establish communication between two sites:
Site A: BCM 450 rls 6.0, Extensions are 3-digits, starting with 1,2,3,4
Site B: CS 1000 rls 7.5, Extensions are 5-digits, starting with 55

We have a license for 5 SIP Gateway trunks.

Is there a way to complete this task without the need to change all the extensions in Site A. As this is very difficult and not possible.

Really appreciate if someone can guide us to solve this issue.

Thanks

 

[Firebird Scrambler]

The easiest way is to give each site an access code to call the other one. i.e. 71 plus the extension number etc.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[cook1082]

I would get the MCDN key code too. For networking.