ESPA 4.4.4 MX -One R5

[AastraGuru]

Hi,

Does anyone made connection with ESPA 4.4.4 from nursery system (or another ESPA equipment) to MX-one? Idea is that nursery system sends messages via ESPA 4.4.4 to MXone where messages is displayed in dect phones.
Is this done with TLU 80 card? Licence? Speech is not needed.
Does this kind of system created on MX with PA (paging) commands?

Regards

Timo

 

[doktor]

I guess that you need SIP DECT with the alarm server, or use the Ascom alarm server.

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx

 

[AastraGuru]

Hi doctor and others!
Customer has already Aacom nursery system integrated with MX-One and we are assuming that Ascom alarmserver ( AscomIMS) is connected to MX One with ESPA.
Or is there other way how IMS can communicate with MX-One? We just cannot ask this directly from local Ascom and customer doesnt know and I dont have access this MX-One...

Regards
Timo

 

[doktor]

If you have the Ascom and IMS, I guess that you need discuss this with your Ascom dealer.
In MX-ONE through the MSCOP commands this feature is enabled. Signalling is done by IP (in MD110 - the NIU board).
The Ascom alarm and control modules connect through the IP net to the MX-ONE/MD110.

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx