ESA and TON:NATL issue on D-channel message
I have an Opt 61C Rls 3. Customer wants to use ESA because of the OSN capability, however, when I turn ESA on, and send the call out Route 0 (Windstream PRI), the TON: is NATL and Windstream wants to see LOCL. The first thing that came to mind was CTYP on DMI tables, however, on RLS 3, ESA is not sending the call out an RLI, its directly accessing the trunk and dialing 911. I tried NATL NO in the Route Data Block to no effect.
CUST 0
ESDN 911
ESRT 0
DDGT 911
DFCL
OSDN 2687
When they dial 8911 (to go out through BARS), I can manipulate the DMI and make the call LOCL without an issue. (as long as I turn LTER to no, that is)
With ESA turned on - user dials 911 (no access code)
DCH 24 UIPE_OMSG CC_SETUP_REQ REF 0000208F CH 24 23 TOD 13:50:50 CK 34766298
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:xxxxxxx NUM PLAN: E164 TON: LOCL
CALLED #:911 NUM PLAN: E164 TON: NATL
DCH 24 UIPE_IMSG CC_PROCEED_IND REF 0000206E CH 24 22 TOD 11:54:46 CK 33A1DA52
DCH 24 UIPE_IMSG CC_DISC_IND REF 0000206E CH 24 22 TOD 11:54:46 CK 33A1DA96
CAUSE: #1 - UNASSIGNED NUMBER
Dialing 8911 (Lter is no, otherwise, the same issue as above)
DCH 24 UIPE_OMSG CC_SETUP_REQ REF 0000206F CH 24 22 TOD 11:54:48 CK 33A1F122
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:xxxxxxx NUM PLAN: E164 TON: LOCL
CALLED #:911 NUM PLAN: E164 TON: LOCL
Any suggestions? Thanks
I have an Opt 61C Rls 3. Customer wants to use ESA because of the OSN capability, however, when I turn ESA on, and send the call out Route 0 (Windstream PRI), the TON: is NATL and Windstream wants to see LOCL. The first thing that came to mind was CTYP on DMI tables, however, on RLS 3, ESA is not sending the call out an RLI, its directly accessing the trunk and dialing 911. I tried NATL NO in the Route Data Block to no effect.
CUST 0
ESDN 911
ESRT 0
DDGT 911
DFCL
OSDN 2687
When they dial 8911 (to go out through BARS), I can manipulate the DMI and make the call LOCL without an issue. (as long as I turn LTER to no, that is)
With ESA turned on - user dials 911 (no access code)
DCH 24 UIPE_OMSG CC_SETUP_REQ REF 0000208F CH 24 23 TOD 13:50:50 CK 34766298
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:xxxxxxx NUM PLAN: E164 TON: LOCL
CALLED #:911 NUM PLAN: E164 TON: NATL
DCH 24 UIPE_IMSG CC_PROCEED_IND REF 0000206E CH 24 22 TOD 11:54:46 CK 33A1DA52
DCH 24 UIPE_IMSG CC_DISC_IND REF 0000206E CH 24 22 TOD 11:54:46 CK 33A1DA96
CAUSE: #1 - UNASSIGNED NUMBER
Dialing 8911 (Lter is no, otherwise, the same issue as above)
DCH 24 UIPE_OMSG CC_SETUP_REQ REF 0000206F CH 24 22 TOD 11:54:48 CK 33A1F122
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:xxxxxxx NUM PLAN: E164 TON: LOCL
CALLED #:911 NUM PLAN: E164 TON: LOCL
Any suggestions? Thanks
