ESA 911 and 9 911 2

[andkas]

I am setting up ESA and having an issue when dialing 9 911 that it does not show in ESA on the OSDN or audit. When I dial 911 it shows in ESA OSDN and the audit I think I need an entry 1 but the call fails when I have an entry 1 for 9911 . Also it appears that I could only have the OSDN on one phone is that correct?

I have an SPN for 911 but nothing for 11.
Here is my ESA, SPN, RLI and DGT

ENTR 0
ESDN 911
ESRT 51
DDGT 911
MISDIAL_PREVENTION YES
MISDIAL_DELAY 3
ALOW_LASTDIG_REPEAT YES
DFCL
OSDN 6333
VOLO_COUNT 0

SPN 911
CLTP NONE
RLI 34
SDRR NONE
ITEI NONERLI 34

RLI 34
ENTR 0
LTER NO
ROUT 51
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 0
DMI 28
FCI 0
SBOC NRR
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO

ENTR 2
LTER NO
ROUT 59
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
SCNV NO
CNV NO
EXP NO
FRL 0
DMI 0
ISDM 0
FCI 0
DORG NO
SBOC NRR
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO

ISET 3
NALT 5
MFRL 0
OVLL 0

DMI 28
DEL 0
ISPN NO
CTYP INTL

 

[jamie2]

You need to set you RLB as a Local Termination, so it will dial 911 and use you ESA table.

 

[andkas]

Do you mean set LTER to Yes my RLI and use no DGT ?
Then when someone deial 9 911 it will sow in the ESA notification out go out the PRI via the ESA

 

[StanleySteamer]

That is correct, make LTER YES and use a DMI entry that has DEL 0 and inserts nothing.

BUT....Do not use DMI 0! I don't remember why exactly, but it won't work properly with ESA.
Create a new DMI (if you have to) that deletes nothing and inserts nothing.

 

[PhonemanSam]

Your SPN should be SPN 11, not 911.

Nortel all the way.

 

[jamie2]

In correct... It needs to be SPN 911.

911 will hit ESA, 9,911 will be 9 accesses BARS and 911 will hit the SPN.

 

[StanleySteamer]

jamie2 is right.
When you are using ESA you don't need an SPN 11. That was the old way of setting up 911 before the ESA feature was available.