ERS5520 Stack - Change Base

[nyy1023]

I am a Cisco guy now learing Nortel. I know of the way to change the master (base) switch in a Cisco without having to reboot the entire stack. Is there a way to do this with the Nortel?

For example:
If I need to replace the Base switch, the stack IP and base designation change to the next in the stack. Is there a way to force the "actual" Base switch back without having to reboot all the switches in the stack?

CCNA, CCNP

 

[trentsteenholdt1]

You change the Hardware Unit numbers around through CLI.

Just unplug the switch from the stack, a slave will become the base.

Trent Steenholdt

Systems Engineer
The University of Notre Dame Australia

-Great scott!