Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ERS-8610 GIG Blade port losing connectivity

Status
Not open for further replies.

L33tlucid

Technical User
Jul 9, 2009
32
US
I have an ERS-8610 ITN with a GBIC GIG Blade in the 3rd slot in the chasis. With some switches around the facility, the connectivity is lost on the GIG blade ports sparatically. I have to go into Device Manager and disable and re-enable the port on the ITN to regain connectivity. Is there something that is triggering the loss of connectivity? Maybe packet loss or some setting in the ITN that stops the flow of traffic if something is found on the network? Maybe some sort of security feature? Please let me know if you have any idea what this may be caused by and also if you need more information. Thank you.
 
Try disabling auto-negotiate on the port. Hard code it to Gig/Full and see if it stops.
 
I tried changing it to Gig/Full manually and I got this error:

"rcPortAdminSpeed.215: Cannot change the port speed on this type of port." Any ideas?
 
Is the port being disabled due to loop detection or CP limit? The system event logs should give you an indication why the port is disabling.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top