Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Errors on leader0 on IPL 4.5

Status
Not open for further replies.

mistoceva

Technical User
Oct 17, 2005
54
RO
Hi,

I have a Meridian 81C rls 4.5 IP enabled and I create a new node with 4 cards: L0,L1,2xF.

I installed ~ 100 IP Phones i2004 model NTDU92AB70, the IPLine is rls 4.50.25 and I have the following errors on Leader0:

"SEP 30 07:27:04 CSV: Warning Terminal restarted
SEP 30 07:27:04 CSV: Warning Failed to decode the TN retreived from terminal
SEP 30 07:27:19 tRUDPSS: Warning Forwarding for connect Id = 40194992, error of type = 6 (connection lost).
SEP 30 07:27:19 tRUDPSS: Error Delinquent connection 0x26553b0 lost between [10.55.75.222:4100] and [10.144.8.13:5000], previous status was -1
SEP 30 07:28:03 tRUDPSS: Warning Forwarding for connect Id = 40227232, error of type = 6 (connection lost).
SEP 30 07:28:03 tRUDPSS: Error Delinquent connection 0x265d1a0 lost between [10.55.75.222:4100] and [10.144.8.6:5000], previous status was -1
SEP 30 07:28:34 tRUDPSS: Warning Forwarding for connect Id = 40469676, error of type = 6 (connection lost).
SEP 30 07:28:34 tRUDPSS: Error Delinquent connection 0x26984ac lost between [10.55.75.222:4100] and [10.144.8.13:5000], previous status was -1
SEP 30 07:29:03 tRUDPSS: Warning Forwarding for connect Id = 50478620, error of type = 7 (other end restarted connection).
SEP 30 07:29:03 tRUDPSS: Warning 10.144.8.34 Connection restarted, cid = 0x3023e1c
SEP 30 07:29:03 CSV: Warning Terminal restarted
SEP 30 07:29:03 CSV: Warning Failed to decode the TN retreived from terminal"

Somebody have ideea why I have this errors on leader0?

Regards
 
In the same Node you must have only 1 Leader, one of the 2 SS. the 2nd SS is follower, MC are follower also.

Post here STAT SERV command from LD 117
 
Hi,

I don't have Signaling Server.

When you don't have SS the Leader1 like as follower but it can take the attributes of Leader0 when this (Leader0) is down.

Regards
 
what are these 2 addresses [10.55.75.222:4100] and [10.144.8.13:5000]
 
Hi,

The IP 10.55.75.222 is the NODE IP and the IP 10.144.8.13 is the IP of the set.

Regards
 
The only time i tried to do such a config was in rls 25, and no way to make the system to works correctly. I guess the rls of ITG has something to see with this problem.
The latest rls for ITG/MC is 3.1.60 for what i know. How did you install 4.50.25 without SS??
 
Hi,

I installed 4.50.25 using CLI from maintenance port of the MC.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top