Error too many DSS units 2

[memphisribs]

I have tried searching but to no avail.

I have an error message “Too many DSS units in use by system extensions” What does it mean?
Configuration: IP 500 v2 rel 6.0 (8)
1- Digital station 8
1- V2 combo board
1- Legacy carrier w/ PRI module
1- Phone 8
10- 5420 sets
2- 5402 sets
No EU-24’s not even most of the buttons programmed on the sets.
By the way there doesn’t seem to be any problems, just an error message.


45 years in the business and counting.

 

[tlpeter]

I would upgrade it to 6.0.18 first.


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[Bas1234]

^upgrade....It's a bug...there is even a worse bug in the 6.0.8. It can lose it config.

After upgradeing check the embedded filemanagement to see if the config.cfg is more then 17000 bytes.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[memphisribs]

Thanks to both of you for the advice, looks like an upgrade is on the horizon.

45 years in the business and counting.

 

[amriddle01]

Sooner rather than later I would advise, it happens without warning

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers

 

[tlpeter]

always nice when you try to change something at the end of the week just before you go on a holiday


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[Maxwell1001]

im on the latest 6.0.18 and this is still a active error on my system...

so far after earlier bugs on 6 it was the least of our worries

ACA - IP Office
ACS - IP Office
ACSS-SME

 

[tlpeter]

You still have the too many DSS or the default config ?


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[Maxwell1001]

we have no dss, we have no eblf, all users have spare buttons, no one has display all buttons im not sure what else to check

ACA - IP Office
ACS - IP Office
ACSS-SME

 

[tlpeter]

Buttons programmed on a phone that is not having enough buttons perhaps ?

An example
A button programmed on button 25 while th phone only has 24 buttons on the phone or a user with 8 programmed buttons but logged in on a 1603 (3 buttons)


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[Maxwell1001]

checked all of that and the user profiles...i might have missed it...

ACA - IP Office
ACS - IP Office
ACSS-SME