Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error Save Translation? 2

Status
Not open for further replies.

Eswift88

IS-IT--Management
May 19, 2010
19
US
System: G3 Version: V11

Tring to save translations

Error:
Cannot access the standby SPE at this time

??
 
Port Maintenance On Alt Alarm Svc Ack? Date Date
Name Brd? Name Type State 1 2 Alarmed Resolved

DLY-MTCE n MAJOR 01/02/01:33 00/00/00:00
01B DUP-CHL n MAJOR 01/20/12:19 00/00/00:00
01B DUP-CHL n MAJOR 01/20/12:43 00/00/00:00
01B DUP-CHL n MAJOR 03/22/08:08 00/00/00:00
01 POWER y MINOR 12/30/12:35 00/00/00:00
 
Had a week off,

So about to order a (32Mb) TN1650B V4 from ebay and install it...

Would this be a fare assumption since I got the test time exceeded error on this memory board?


Thanks for everything so far!
 
swap memory board 1 and 3
power down, power up
see if memory board 1 fails.

vintages are not critical

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
 
Ok figured out the stupid test timeout error... Guess My Carrier doesn't want to go through the test all circuit packs (default), as it times out half way through the testing everytime...

All Memory boards Pass all their Tests

Now The Errors come at,

MSS Passed
Disk Harddrive FAIL
Disk Optical FAIL

I had a spare Optical disk drive and spare Harddrive board. Inserted both spares powered back up and they still FAIL this test

Should I replace the MSS Network board even though it Passed?

 
Ok Guys I've replaced the MSS board and Disk drive... and All tests are passing now!!!!

So I think I'm ready to boot this SPE-B back up

Could someone help me with steps on that?
sitting at <SPE-B-LOCKED> on the terminal screen

commands are
r - reboot from primary
s - rebbot from secondary

both those commands complain that SPE is locked standby boot aborted

Should I unlock SPE-B and boot from my "secondary" which I'm thinking means the Optical Disk? Which I'll have the Disk from SPE-A installed in it...
Then how should I Write from Optical disk to Harddrive?

Sorry,
Being super careful here I dont want to messup SPE-A which is running production users.




 
Ok well got the Maintenance book for Definity Enterprise comunication server

And Instialization and recovery is just no help

Can't get shadowing to work
Can't get it to refresh
Handshaking is Fine which PDF seems to focus on for some reason.

All bootup tests pass, have a freshly made back up Optical disk in SPE-B from the working SPE-A. Tried booting SPE-B without the harddrive connected and with it connected...

all i end up with it a blinking amber light on the processor card and status SPE

Duplicated YES
SPE Selected - Auto
Standby busied - no
Standby refreshed? no
Standby shadowing off
Standby Handshake: UP
Spontaneous interchange : No

SPE-B
Standby
auto
state of health: not refreshed
out-of-service
yes
out of service

no recent Alarms or Errors on SPE hardware.



I'm completely out of idea's here please help....



 
You need professional help

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top