Error : Not enough BW for call beetwen 0x65D4 and 0x6CCB

[JAAGB]

Hi All,
I am getting the following error some times on the 1000E on that time i cant make any out side calls.
Help Please....

SRPT189
Not enough BW for call beetwen 0x65D4 and 0x6CCB

SRPT189
Not enough BW for call beetwen 0x65D4 and 0x6CCB

SRPT189
Not enough BW for call beetwen 0x6446 and 0x6DCA

SRPT189
Not enough BW for call beetwen 0x6446 and 0x6DCA

SRPT189
Not enough BW for call beetwen 0x6446 and 0x6DCA

SRPT189
Not enough BW for call beetwen 0x6446 and 0x6CCB

SRPT189
Not enough BW for call beetwen 0x6446 and 0x6CCB

SRPT189
Not enough BW for call beetwen 0x6446 and 0x6CCB

 

[johnpoole]

are you using ip trunks? refers to a bandwidth problem

john poole
bellsouth business
columbia,sc

 

[JAAGB]

no i am not using IP trunk

 

[shelton2]

We have received these error messages with regards to our wireless IP phones. Our problem stemmed from bandwidth issues on our wireless network. We had other devices on the wireless network that was crowding out the IP phones, something similar to a denial of service condition. We also received high numbers on our QoS packet loss percentages, also the IP phones experienced voice dropouts, our problem became severe before it was rectified.