Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error messages Rls 5.5, 81c

Status
Not open for further replies.

zardari42

MIS
Mar 28, 2009
43
PK
Hi, I am administring a 81c Release 5.5, i am getting error elow periodically after every 10 or 20 minutes. Pabx patches are upto date

TFS401 45 24 1 14 4 17 11
TFS401 45 9 28 17 10
TFS401 45 9 12 17 10

ERR5142 00000000 00000014


BUG040
BUG040 : 24 000019FD 0 00000000 00003656 00000000 070047BC 00000307 00008008 000
00000 00000000 0 00000000 00000000 00000000 0 0000A038 000018A9 00002348 0000A8
52 0000A962 00004818 0000A47A
BUG040 + 00BEE2BC 00B86C46 00E99CC5 00E97D3F 00BE228A
BUG40 + 00BA5AFC 00BA4C2B 00BA43A7 1327B2F1 00B9ED44
BUG040 + 01F90F7C 01F5AC0E 00BA4D1A 00BA43A7 1327B2F1
BUG40 + 00B9ED44 01F90F7C 01F2119B 01F1F954 01F1E955
BUG040 + 01D29438 01D293E4 01D24E3F 01D1DD75 0122F65C

BUG279
BUG279 : 070047BC 00000307 00008008 00000000 00000000 0 00000000 00000000 000000
00 0 0000A038 000018A9 00002348 0000A852 0000A962 00004818 0000A47A
BUG279 + 00BEE2BC 00BE2295 00BA5AFC 00BA4C2B 00BA43A7
BUG279 + 1327B2F1 00B9ED44 01F90F7C 01F5AC0E 00BA4D1A
BUG279 + 00BA43A7 1327B2F1 00B9ED44 01F90F7C 01F2119B
BUG279 + 01F1F954 01F1E955 01D29438 01D293E4 01D24E3F
BUG279 + 01D1DD75 0122F65C


Can somebody help how to prevent these errors??



ERR%5142
--------
ERR5142 x y
Required Configurations for TRO-CM to work is missing.
Check TRO( Overlay 16) and/or VTRO ( overlay 17) prompts.
Where: X is the customer number.
Y is the route number.
Enable TRO and/or VTRO.
Severity: Minor


TFS0401
-------
TFS0401
A connection was held for greater than or equal to 36 ccs, but less
than 50 ccs. Usage and peg count are still accumulated.

Severity: Minor

BUG0040
-------
One of the loops involved in the connection is: a) not equipped
(ULP_PTR = NIL b) not a TERM_LOOP or CONF_LOOP
c) not enabled d) slot is zero LOOP1, LOOP2, SLOT Procedure
NTWKMEMORY

Severity: Minor


BUG0279
--------
A non idled DTR is found.
Contact your technical support group.
Severity: Major

 
You could check your Route/s (RDB) to see whether TRO is set to YES thats if you require calls to be treated this way
ie calls comes in and back out on the same

Cheers!!
 
I have some error occurring in my system accept ERR5142, can somebody point how can i remove these BUG/TFS messages?
Thanks
 
If you do a forum keyword search on ERR5142 , there are a number of pointers

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators
 
GH i am not getting ERR5142 rather i m getting above mention BUG and TFS error, Any more advice?
 
is your system patched with the up to date deplist?
 
@chintoo:
"Any more advice?"

Yes. start your own post instead of taking over zardari42's.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top