error messages after INTERLOOP TEST START durring Midnights

[Malley63]

HI
I have an 81c front ending an xt, whenit runs the midnight and the INTERLOOP TEST START we get these error messages. What do you think is causing this?

% BSD206 0:8
% BSD206 22:8
% BSD206 23:8
% BSD206 24:8
% BSD206 1:8
% BSD206 2:8
% BSD206 3:8
% BSD206 4:8
% BSD206 5:8
% BSD206 6:8
% BSD206 7:8
% BSD206 9:8
% BSD206 16:8
% BSD206 17:8
% BSD206 18:8
% BSD206 19:8
% BSD206 20:8
% BSD206 21:8
% BSD110 8
% BSD206 32:56 59
% BSD206 33:56 59
% BSD206 34:56 59
% BSD206 35:56 59
% BSD206 36:56 59
% BSD206 37:56 59
% BSD206 38:56 59
% BSD206 39:56 59
% BSD206 40:56 59
% BSD206 41:56 59
% BSD206 48:56 59
% BSD206 49:56 59
% BSD206 50:56 59
% BSD206 51:56 59
% BSD206 52:56 59
% BSD206 53:56 59
% BSD206 54:56 59
% BSD206 55:56 59
% BSD206 56:59
% BSD206 57:56 59
% BSD206 58:56 59
% BSD206 59:56
% BSD110 56 59
% BSD206 128:130
% BSD206 129:130
% BSD206 131:130
% BSD206 132:130
% BSD206 144:130
% BSD206 148:130
% BSD206 152:130
% BSD206 153:130
% BSD206 154:130
% BSD206 155:130
% BSD110 130
% BSD111 0:8
% BSD111 1:56 59
% BSD111 4:130

 

[johnpoole]

i've seen that when i had non quad denisty cards behind a newer rls cpu.. you ref speech path 8 on the front half, being a lot of your cards may be tn's 0-7, ? speculation can be as far off as a random guess... i would try testing all my speech paths.. do you have any problem with either one way conservation or delay in dialtone?

john poole
bellsouth business
columbia,sc

 

[Malley63]

HI JOhn

yes there have been reported cases of one way speach.

 

[StanleySteamer]

The messages are telling you that it thinks there is a problem with loops 8, 56, 59 and 130.
Do you actually have anything connected to those loops?

 

[Malley63]

Thanks Stanley

I found loops 8, 56, 59 and 130 to be pri loop that were enabled but not cinfigured. I have disabled them and am running midnights to see if the error has gone.