Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error in setting configuration data: Cannot do any changes in IP Trunks -> SIP Trunking

Status
Not open for further replies.

Openway

Systems Engineer
Dec 3, 2019
6
SA
Hello,

Getting error while doing any changes on BCM 50 @ IP Trunk -> SIP Trunks.

Error in setting configuration data. BCM_FEPSRemoteGatewaySettingData.GwRouteType is a required field.

Downloaded BCM element manager from app - When trying to connect the same device showing device model not available.

Can you some share me the link for BCM Element Manger 62.0.3

Regards,
Fazil
 
The link is on the bcm itself.
Enter the IP address in your web browser (IE 11 works best)
Then navigate to something like You will see all the software to download.




________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
@ curlycord

Thanks downloaded Element manager.
While connecting to BCM 50 getting this error:

Exception occurred when trying to connect
Detector 'BCMDetector' cannot determine the device type for X.X.X.X.
 
Really, Thanks.

Its works. Now next target to configure trunking between BCM 50 and Avaya IP Office
Which one will be better SIP or H323.

I have go through several threads for trunking. All routing to a document from avaya website


In this they shown trunking with SIP.

Any thread reference for complete setup for trunking in BCM side.
 
Better, Do you have any reference to go through the steps in BCM
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top