Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error Codes

Status
Not open for further replies.

learn2shoot

IS-IT--Management
Jun 15, 2007
79
US
I have a few error codes displaying in Monitor. Some of which are easy enough to remedy (need to insert a tape) Others seem a little more complicated. We have 60 channels recorded from a S8710 Avaya Switch, which supports about 150 phones. Incoming call volume is about 10-20 calls at any given moment. We are using NICE 8.9.


1 - 1453 - ???
2 - 1408 - CLS_REC_VOICE_LOGGER_NOT_ENOUGH_LOGGER_
RESOURCES (there are not enough
resources)
3 - 700 - Low Statistics Alarm: On 2 input channel(s)
4 - 715 - high Statistics Alarm: On 0 input channel(s)

I referenced the following documents, but it really did not help me much.

Any assistance would be appreciated. Thank you

Bill
 
Well... let me try to help you...

What is your type of recording?

And if u make a query what is the status of the calls?

If u post your mail i could send u the Exception Errors List.
 
we are doing pseudo 100% recording. We realize that if we get more than 60 calls the #61 and on will not be recorded until a channel opens up.

and we have IP phones.

clark_william_2 at bah dot com


thank you
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top