ERROR code BERR600

[Mrtelephoneman]

I got these errors yesterday evening for the first time. What does it mean and is it something critical?

BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803e in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803f in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803e in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803f in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803c in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803d in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803c in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803d in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803a in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803b in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803a in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x803b in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x8038 in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x8039 in Group 0
% Check IO device, network device, or PS card
%
% BERR600 NCB 1 0: Check Device "LOOP 0" at address 0x8038 in Group 0
% Check IO device, network device, or PS card

 

[PERRYPJ]

Assuming there still going on, the error is stating that you have a bad Per Sig card in Loop 0

OLD ROLMEN WORKING ON NORTELS

 

[Mrtelephoneman]

I have not done anything yet to resolve the problem because I wasn't sure what to do. I haven't got anymore of those BERR errors since the one I posted about, do you think reseating the card may help this out, or should I just leave it alone for now being that the errors didn't come back?