Error code 429 when loading CentreVu Supervisor V11

[jimbojimbo]

Just a note:

When loading CentreVu Supervisor V11 you may receive a <429> error when you first attempt to start it up. The readme tells you to run Reg.bat to register the .dll files. If you still recieve the error you may need to edit Reg.bat, remove the &quot;@ echo off&quot;, put a &quot;pause&quot; line between each registration line and then re-run Reg.bat. This will allow you to see any errors that occur registering the CentreVu .dll's.

If you are running SNA Server Version 4, your install will fail. This is caused by an incompatability when using atl.dll version 4 (installed with SNA server version 4). You can correct the issue by copying an old atl.dll (version 3.00.8449 works) in the WINNT\System directory, run &quot;regsvr32 atl.dll&quot; from the command line, and then re-run Reg.bat.

 

[nickpin]

If using Windows 2000 this simply means the user isn't local administrator on the PC, we get this a lot and adding them clears it.

Nick

 

[jimbojimbo]

This was done as the local admin. This is a dependency issue. The .dll's will not register correctly with the atl.dll version 4 which is brought in with SNAserver 4. Once atl.dll version 3 was registered, the CVSup .dll's were able to be registered. James Middleton
ACSCI/ACSCD/MCSE
Xeta Technologies
jim.middleton@xeta.com