I am having problems with Arcserve 2000 SP4 running on a w2k server. The servers that i am backing up is running NT 4.0 SP6a with remote agent. The problems is that the backup is "50%" done and i receive and E8522 error.
The problem appears after a few hours of backup when i receive an "error 8522 - failed to receive data from the client agent EC=10060 and EC=1). This happes at several servers at "random" time interval. I've checked the CA document "Troubleshooting Arcserve 522 errors" - but this hasn't done the trick for me.
I've checked the NIC settings, modified the send \ receive buffer size, i've stopped AV software but i still receive the 8522 messages.
Anyone have any good suggestions on how to troubleshoot this one ?
The problem appears after a few hours of backup when i receive an "error 8522 - failed to receive data from the client agent EC=10060 and EC=1). This happes at several servers at "random" time interval. I've checked the CA document "Troubleshooting Arcserve 522 errors" - but this hasn't done the trick for me.
I've checked the NIC settings, modified the send \ receive buffer size, i've stopped AV software but i still receive the 8522 messages.
Anyone have any good suggestions on how to troubleshoot this one ?