Error 619: The specified port is not connected

[IanGlinka]

I am receiving "Error 619: The specified port is not connected" when I try to establish a VPN connection using the Microsoft VPN adapter.

I am running Windows 2000 with all service packs and updates. This started happening after I installed a Cisco PIX 501 on my network. I am guessing there is some sort of default port blocking that is interfering with the VPN connection, however, I cannot seem to figure out how/what to enable in the PIX's PDM to get this to work.

Any info would be greatly appreciated.

Thanks
Ian

 

[themut]

If you are passing IPSec traffic throug the PIX you need a static translation and you also need to open UDP port 500 and protocol 50.

If you are passing PPTP traffic through the PIX you will need a static translation and you will also need to open TCP 1743 and protocol 47.

Hope this helps.