I have a BCM 400 with PRI 3.7 software. I just got a call from the customer and the system has an error code of 420
Does anyone know what that is?
MRoberts
Does anyone know what that is?
MRoberts
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Error 420 BCM 3.7 1
- Thread starter mroberts
- Start date
NorstarWiz
Vendor
You sure it's a 420? I don't see that listed in the event ID table.
- Thread starter
- #3
That's what the customer said. But they are also having trouble with their T-1 coming in from telco. (Telco side is down). SO.... I am thinking it is some kind of DTM error.
MRoberts
MRoberts
-
1
- #4
option11newby
Technical User
- Feb 18, 2004
- 524
It could be 42-0
42 being the Event ID and 0 being the DTM?
Type 42 is linked to Loss of Frame. Most likely cause is an irregularity with the PSTN connections.
Most likely network provider.
NCSS, NCDS, NCTS
42 being the Event ID and 0 being the DTM?
Type 42 is linked to Loss of Frame. Most likely cause is an irregularity with the PSTN connections.
Most likely network provider.
NCSS, NCDS, NCTS
- Thread starter
- #5
- Status
Similar threads
- Question