Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ERR5132 WHAT AND WHERE IS "TRO"
- Thread starter BIGDOTDOG
- Start date
Ld 16 RDB under ISDN. This can be printed out in ld 21. There may be a gate opener so take a look at your docs to confirm if you are trying to program it, it is not in all routes.
The error you are seeing, most often occurs on a tie line between PBX's where both PBX's think the number is in the other. So when you dial from A to B, B just sends it back, then A sends it back and so on until all your channels are used up. Of course I am sure there are other examples of how this can occur too.
The error you are seeing, most often occurs on a tie line between PBX's where both PBX's think the number is in the other. So when you dial from A to B, B just sends it back, then A sends it back and so on until all your channels are used up. Of course I am sure there are other examples of how this can occur too.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
